Kreg Shelving

BySCWD

When I was first setting up my shop,  I made some quick shelving for my power tool boxes. Like everything in life, we tend to look back and critique some things. Well, I think the new version of the shelf is better.

It’s nothing special, I just used a couple of pieces of plywood and particle board that I had laying around. I also used some pocket hole screws, glue, and the Kreg Shelving Jig.

I put some strong cleats on the back and tacked some molding on the front. It suites my needs for now. Obviously the design will change once I get more tools and room in my shop.

Materials Used

  • 3/4″ Common Pine Plywood
  • 3/4″ Partical Board
  • 2×4 Studs
  • Pine Strips (Framing)
  • Pocket Hole Screws
  • Kreg Shelving Jig
  • Titebond II Wood Glue
  • Watco Natural Danish Oil

YouTube Episode

Build Photos

Similar Posts

  • Farmhouse Bench

    BySCWD

    This was the second of a two part series for my wife’s command center area. I really wanted to design my own bench, but my wife really liked this particular farmhouse bench style. This was a fun project to make. We used a specific stain recipe to give it a weathered look. This was the…

  • Modern Farmhouse Nightstands

    BySCWD

    After completing the farmhouse king bed project, we wanted to continue the momentum and start the nightstand project. We fired up Sketchup and started a design my wife liked. Originally, we planned to have a smaller drawer on the top, but as we built, things changed. What happened is, I figured we had enough wood…

  • Dovetail Candle Box

    BySCWD

    It’s been 14 wonderful years with my wife and I wanted to do something special. I think a gift like this that is made with love, more importantly with wood, is way more special than any store bought gift. I had just purchased some nice hard wood and decided to go with the walnut. This…

  • Adjustable Tape Dispenser

    BySCWD

    I wasn’t really needing a tape dispenser, but I saw a random video on YouTube and it gave me an idea. Honestly, I think it’s a great thing to have in the shop. This dispenser can accommodate all sizes of tapes in random orders as well. The dividers can be arranged in any order. I’ve…

  • Barn Doors

    BySCWD

    My neighbors caught wind that I dabbled in woodworking and asked if I could make them some barn doors in their hallway office/den area. I was honored they had faith in me and trusted me to do a good job. I will tell you that barn doors are very difficult to get right because they…

  • MiterStation Fence System

    BySCWD

    There has been a long pause on the channel due to many variables. The most important one is we moved to a new home and the adjustment has taken a lot of my focus away from woodworking. However, I’ve managed to get full rein of the garage and have started to create a workflow with…